The Best Way To Remove Watermark from the Bathroom Wall

Best Way To Remove Watermark from the Bathroom Wall

By Jane K - 21 of July, 2021

Hard water is water with higher-than-usual mineral content. Hard water contains calcium and magnesium ions. Hard water stains occur when hard (mineral-rich) water evaporates, leaving a grimy residue on your surfaces. Most commonly, you’ll find hard water stains in the bathroom on glass, porcelain, tile, and bathroom wall. You may also find hard water stains on your dishes and clothing.


The bathrooms wall get dirty very often. You use expensive paint on your bathroom wall, but with constant exposure to hard water, it gets blemished very easily. These stains are so stuck on the wall that they cannot be removed easily. Eradicating the water stains can give your wall a makeover so that it looks nearly new again.


In fact, you may find that repainting with a semi-gloss, gloss or bathroom paint may be the only way to completely fix this problem. Before you take that step, however, give this one a try.

You need to prepare

  1. Bucket
  2. 1 gallon warm water
  3. Clean sponges
  4. ½ cup borax
  5. ½ cup white vinegar
  6.  tbsp household ammonia
  7. ¼ cup baking soda
  8. Spray bottle

Getting Rid of Drip Marks on Your Bathroom Walls

Steps to Remove the Stain:

First thing that you need do is to mix and pour all of the following items into 1 gallon of warm 

  • 1 cup household ammonia,
  • 1/2 cup vinegar (you can even use 1/2 cup of Borax if you want to)
  • 1/4 cup baking soda
  • All of the items need to be mixed together and we recommend that you use a mop bucket for this purpose.

Then, take your spray bottle and fill it with the solution that you have made

  • Next, you need to spray the walls with the solution.
  • You need to allow the solution to soak for at least 15 minutes before you proceed to clean the walls.

In order to clean the walls, you have to use a scrub especially scrub that have a non-abrasive scrub pad

  • Always start your scrubbing task right from the bottom of the bathroom walls and finish at the top of it

Finally, once you have finished you can wipe and clean the wall by using a wet dish rag

  • Wipe the wall starting from the top to the bottom of the wall.
  • If you find it is necessary, repeat the process so that your wall is clean thoroughly.

Additional Tips

  • Before washing walls, make sure that baseboards are properly sealed with caulk at the top and on the floor so water does not infiltrate the wall system. A towel or sheet against the base of the wall can help catch excess moisture. (Be sure to remove it when you’re finished cleaning).

  • Streaks still there? Try Awesome – it works on almost anything and is available at dollar stores. Just as any cleaning product, test a small area first to ensure that it does not remove the paint or cause discoloration.

  • To avoid excess moisture on walls in the future, make sure the room is well ventilated. Use fans, if necessary, to prevent the build-up of humidity.

Related Products

BeaBos™ Mini Broom & Dustpan - BeaBos Inc
$29.99$19.35
Turbo Cleaning Gun - BeaBos Inc
$79.99$47.35
BeaBos™ Scraping Broom - BeaBos Inc
$58.45$34.12

Related Blogs

The Best Way To Remove Watermark from the Bathroom Wall
Best Way To Remove Watermark from the Bathroom Wall By Jane K - 21 of July, 2021 Hard water is...
Remove the paint from brick with these special tips
Remove The Paint from Brick With This Special Tip By Jane K - 19 of July, 2021 It isn’t easy...
How to Get Rid Of Bleach Stains from Fabrics and Prevent Future Stains
How to Get Rid Of Bleach Stains from Fabrics and Prevent Future Stains By Jane K - 7 of July,...
How to Clean and Organize Your Pantry
How to Clean and Organize Your Pantry By Jane K - 4 of July, 2021 Just like the rest of...

Leave a comment

Please note, comments must be approved before they are published